6064 ixgbe needs X550 support

          --- old/usr/src/uts/common/io/ixgbe/ixgbe.conf
          +++ new/usr/src/uts/common/io/ixgbe/ixgbe.conf

   1    1  #
   2    2  # CDDL HEADER START
   3    3  #
   4    4  # The contents of this file are subject to the terms of the
   5    5  # Common Development and Distribution License (the "License").
   6    6  # You may not use this file except in compliance with the License.
   7    7  #
   8    8  # You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
   9    9  # or http://www.opensolaris.org/os/licensing.
  10   10  # See the License for the specific language governing permissions
  11   11  # and limitations under the License.
  12   12  #
  13   13  # When distributing Covered Code, include this CDDL HEADER in each
  14   14  # file and include the License file at usr/src/OPENSOLARIS.LICENSE.
  15   15  # If applicable, add the following below this CDDL HEADER, with the
  16   16  # fields enclosed by brackets "[]" replaced with your own identifying
  17   17  # information: Portions Copyright [yyyy] [name of copyright owner]

  18   18  #
  19   19  # CDDL HEADER END
  20   20  #
  21   21  #
  22   22  # Copyright(c) 2007-2008 Intel Corporation. All rights reserved.
  23   23  #
  24   24  # Copyright 2010 Sun Microsystems, Inc.  All rights reserved.
  25   25  # Use is subject to license terms.
  26   26  #
  27   27  # Copyright (c) 2013 Saso Kiselkov. All rights reserved.
       28 +# Copyright 2016 OmniTI Computer Consulting, Inc.  All rights reserved.
  28   29  #
  29   30  #
  30   31  # Driver.conf file for Intel 10GbE PCIE NIC Driver (ixgbe)
  31   32  #
  32   33  # -------------------- Jumbo Frame --------------------
  33   34  # default_mtu
  34   35  #       The size of the default MTU (payload without the ethernet header)
  35      -#       Allowed values: 1500 - 16366 (for Intel 82598 10Gb Ethernet controller)
  36      -#                       1500 - 15500 (for Intel 82599 10Gb Ethernet controller)
       36 +#       Allowed values: 1500 - 16366 (for Intel 82598 Ethernet controller)
       37 +#                       1500 - 15500 (for Intel 82599, X540, X550 Ethernet controller)
  37   38  #       Default value:  1500
  38   39  #
  39   40  # default_mtu           = 1500;
  40   41  #
  41   42  # -------------------- Flow Control --------------------
  42   43  # flow_control
  43   44  #       Ethernet flow control
  44   45  #       Allowed values: 0 - Disable
  45   46  #                       1 - Receive only
  46   47  #                       2 - Transmit only

  47   48  #                       3 - Receive and transmit
  48   49  #       default value:  0
  49   50  #
  50   51  # flow_control          = 3;
  51   52  #
  52   53  # -------------------- Transmit/Receive Queues --------------------
  53   54  #
  54   55  # tx_ring_size
  55   56  #       The number of the transmit descriptors per transmit queue
  56   57  #       Allowed values: 64 - 4096
  57   58  #       Default value:  1024
  58   59  #
  59   60  # rx_ring_size
  60   61  #       The number of the receive descriptors per receive queue
  61   62  #       Allowed values: 64 - 4096

  62   63  #       Default value:  1024
  63   64  #
  64   65  # mr_enable
  65   66  #       Enable multiple tx queues and rx queues
  66   67  #       Allowed values: 0 - 1
  67   68  #       Default value:  1
  68   69  #
  69   70  # rx_group_number
  70   71  #       The number of the receive groups
  71   72  #       Allowed values: 1 - 16 (for Intel 82598 10Gb ethernet controller)
  72      -#       Allowed values: 1 - 64 (for Intel 82599 10Gb ethernet controller)
       73 +#       Allowed values: 1 - 64 (for Intel 82599, X540, X550 10Gb ethernet controller)
  73   74  #       Default value:  1
  74   75  #
  75   76  # allow_unsupported_sfp
  76   77  #       Allow use of unsupported (non-Intel) SFP modules in adapters with
  77   78  #       pluggable optics
  78   79  #       Allowed values: 0 - 1
  79   80  #       Default value: 0
  80   81  #
  81   82  # -------- How to set parameters for a particular interface ---------
  82   83  # The example below shows how to locate the device path and set a parameter

  83   84  # for a particular ixgbe interface. (Using flow_control as an example)
  84   85  #
  85   86  # Use the following command to find out the device paths for ixgbe,
  86   87  #       more /etc/path_to_inst | grep ixgbe
  87   88  #
  88   89  # For example, if you see,
  89   90  #       "/pci@7b,0/pci10de,5d@e/pci8086,a15f@0" 0 "ixgbe"
  90   91  #       "/pci@7b,0/pci10de,5d@e/pci8086,a15f@0,1" 1 "ixgbe"
  91   92  #
  92   93  # name = "pciex8086,10c6" parent = "/pci@0,0/pci10de,\<pci10de\>5d@e" unit-address = "0"
  93   94  # flow_control = 1;
  94   95  # name = "pciex8086,10c6" parent = "/pci@0,0/\<pci\>pci10de,5d@e" unit-address = "1"
  95   96  # flow_control = 3;

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX