Print this page
6064 ixgbe needs X550 support
@@ -1,8 +1,8 @@
/******************************************************************************
- Copyright (c) 2001-2012, Intel Corporation
+ Copyright (c) 2001-2015, Intel Corporation
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
@@ -28,11 +28,11 @@
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
******************************************************************************/
-/*$FreeBSD: src/sys/dev/ixgbe/ixgbe_phy.c,v 1.13 2012/07/05 20:51:44 jfv Exp $*/
+/*$FreeBSD$*/
#include "ixgbe_api.h"
#include "ixgbe_common.h"
#include "ixgbe_phy.h"
@@ -44,13 +44,272 @@
static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data);
static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data);
static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl);
static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data);
-static bool ixgbe_get_i2c_data(u32 *i2cctl);
+static bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl);
+static s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *sff8472_data);
/**
+ * ixgbe_out_i2c_byte_ack - Send I2C byte with ack
+ * @hw: pointer to the hardware structure
+ * @byte: byte to send
+ *
+ * Returns an error code on error.
+ */
+static s32 ixgbe_out_i2c_byte_ack(struct ixgbe_hw *hw, u8 byte)
+{
+ s32 status;
+
+ status = ixgbe_clock_out_i2c_byte(hw, byte);
+ if (status)
+ return status;
+ return ixgbe_get_i2c_ack(hw);
+}
+
+/**
+ * ixgbe_in_i2c_byte_ack - Receive an I2C byte and send ack
+ * @hw: pointer to the hardware structure
+ * @byte: pointer to a u8 to receive the byte
+ *
+ * Returns an error code on error.
+ */
+static s32 ixgbe_in_i2c_byte_ack(struct ixgbe_hw *hw, u8 *byte)
+{
+ s32 status;
+
+ status = ixgbe_clock_in_i2c_byte(hw, byte);
+ if (status)
+ return status;
+ /* ACK */
+ return ixgbe_clock_out_i2c_bit(hw, FALSE);
+}
+
+/**
+ * ixgbe_ones_comp_byte_add - Perform one's complement addition
+ * @add1 - addend 1
+ * @add2 - addend 2
+ *
+ * Returns one's complement 8-bit sum.
+ */
+static u8 ixgbe_ones_comp_byte_add(u8 add1, u8 add2)
+{
+ u16 sum = add1 + add2;
+
+ sum = (sum & 0xFF) + (sum >> 8);
+ return sum & 0xFF;
+}
+
+/**
+ * ixgbe_read_i2c_combined_generic_int - Perform I2C read combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to read from
+ * @reg: I2C device register to read from
+ * @val: pointer to location to receive read value
+ * @lock: TRUE if to take and release semaphore
+ *
+ * Returns an error code on error.
+ */
+static s32 ixgbe_read_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr,
+ u16 reg, u16 *val, bool lock)
+{
+ u32 swfw_mask = hw->phy.phy_semaphore_mask;
+ int max_retry = 10;
+ int retry = 0;
+ u8 csum_byte;
+ u8 high_bits;
+ u8 low_bits;
+ u8 reg_high;
+ u8 csum;
+
+ if (hw->mac.type >= ixgbe_mac_X550)
+ max_retry = 3;
+ reg_high = ((reg >> 7) & 0xFE) | 1; /* Indicate read combined */
+ csum = ixgbe_ones_comp_byte_add(reg_high, reg & 0xFF);
+ csum = ~csum;
+ do {
+ if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+ return IXGBE_ERR_SWFW_SYNC;
+ ixgbe_i2c_start(hw);
+ /* Device Address and write indication */
+ if (ixgbe_out_i2c_byte_ack(hw, addr))
+ goto fail;
+ /* Write bits 14:8 */
+ if (ixgbe_out_i2c_byte_ack(hw, reg_high))
+ goto fail;
+ /* Write bits 7:0 */
+ if (ixgbe_out_i2c_byte_ack(hw, reg & 0xFF))
+ goto fail;
+ /* Write csum */
+ if (ixgbe_out_i2c_byte_ack(hw, csum))
+ goto fail;
+ /* Re-start condition */
+ ixgbe_i2c_start(hw);
+ /* Device Address and read indication */
+ if (ixgbe_out_i2c_byte_ack(hw, addr | 1))
+ goto fail;
+ /* Get upper bits */
+ if (ixgbe_in_i2c_byte_ack(hw, &high_bits))
+ goto fail;
+ /* Get low bits */
+ if (ixgbe_in_i2c_byte_ack(hw, &low_bits))
+ goto fail;
+ /* Get csum */
+ if (ixgbe_clock_in_i2c_byte(hw, &csum_byte))
+ goto fail;
+ /* NACK */
+ if (ixgbe_clock_out_i2c_bit(hw, FALSE))
+ goto fail;
+ ixgbe_i2c_stop(hw);
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ *val = (high_bits << 8) | low_bits;
+ return 0;
+
+fail:
+ ixgbe_i2c_bus_clear(hw);
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ retry++;
+ if (retry < max_retry)
+ DEBUGOUT("I2C byte read combined error - Retrying.\n");
+ else
+ DEBUGOUT("I2C byte read combined error.\n");
+ } while (retry < max_retry);
+
+ return IXGBE_ERR_I2C;
+}
+
+/**
+ * ixgbe_read_i2c_combined_generic - Perform I2C read combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to read from
+ * @reg: I2C device register to read from
+ * @val: pointer to location to receive read value
+ *
+ * Returns an error code on error.
+ **/
+static s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr,
+ u16 reg, u16 *val)
+{
+ return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, TRUE);
+}
+
+/**
+ * ixgbe_read_i2c_combined_generic_unlocked - Do I2C read combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to read from
+ * @reg: I2C device register to read from
+ * @val: pointer to location to receive read value
+ *
+ * Returns an error code on error.
+ **/
+static s32
+ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr,
+ u16 reg, u16 *val)
+{
+ return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, FALSE);
+}
+
+/**
+ * ixgbe_write_i2c_combined_generic_int - Perform I2C write combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to write to
+ * @reg: I2C device register to write to
+ * @val: value to write
+ * @lock: TRUE if to take and release semaphore
+ *
+ * Returns an error code on error.
+ */
+static s32 ixgbe_write_i2c_combined_generic_int(struct ixgbe_hw *hw, u8 addr,
+ u16 reg, u16 val, bool lock)
+{
+ u32 swfw_mask = hw->phy.phy_semaphore_mask;
+ int max_retry = 1;
+ int retry = 0;
+ u8 reg_high;
+ u8 csum;
+
+ reg_high = (reg >> 7) & 0xFE; /* Indicate write combined */
+ csum = ixgbe_ones_comp_byte_add(reg_high, reg & 0xFF);
+ csum = ixgbe_ones_comp_byte_add(csum, val >> 8);
+ csum = ixgbe_ones_comp_byte_add(csum, val & 0xFF);
+ csum = ~csum;
+ do {
+ if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+ return IXGBE_ERR_SWFW_SYNC;
+ ixgbe_i2c_start(hw);
+ /* Device Address and write indication */
+ if (ixgbe_out_i2c_byte_ack(hw, addr))
+ goto fail;
+ /* Write bits 14:8 */
+ if (ixgbe_out_i2c_byte_ack(hw, reg_high))
+ goto fail;
+ /* Write bits 7:0 */
+ if (ixgbe_out_i2c_byte_ack(hw, reg & 0xFF))
+ goto fail;
+ /* Write data 15:8 */
+ if (ixgbe_out_i2c_byte_ack(hw, val >> 8))
+ goto fail;
+ /* Write data 7:0 */
+ if (ixgbe_out_i2c_byte_ack(hw, val & 0xFF))
+ goto fail;
+ /* Write csum */
+ if (ixgbe_out_i2c_byte_ack(hw, csum))
+ goto fail;
+ ixgbe_i2c_stop(hw);
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ return 0;
+
+fail:
+ ixgbe_i2c_bus_clear(hw);
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ retry++;
+ if (retry < max_retry)
+ DEBUGOUT("I2C byte write combined error - Retrying.\n");
+ else
+ DEBUGOUT("I2C byte write combined error.\n");
+ } while (retry < max_retry);
+
+ return IXGBE_ERR_I2C;
+}
+
+/**
+ * ixgbe_write_i2c_combined_generic - Perform I2C write combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to write to
+ * @reg: I2C device register to write to
+ * @val: value to write
+ *
+ * Returns an error code on error.
+ **/
+static s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw,
+ u8 addr, u16 reg, u16 val)
+{
+ return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, TRUE);
+}
+
+/**
+ * ixgbe_write_i2c_combined_generic_unlocked - Do I2C write combined operation
+ * @hw: pointer to the hardware structure
+ * @addr: I2C bus address to write to
+ * @reg: I2C device register to write to
+ * @val: value to write
+ *
+ * Returns an error code on error.
+ **/
+static s32
+ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw *hw,
+ u8 addr, u16 reg, u16 val)
+{
+ return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, FALSE);
+}
+
+/**
* ixgbe_init_phy_ops_generic - Inits PHY function ptrs
* @hw: pointer to the hardware structure
*
* Initialize the function pointers.
**/
@@ -59,26 +318,38 @@
struct ixgbe_phy_info *phy = &hw->phy;
DEBUGFUNC("ixgbe_init_phy_ops_generic");
/* PHY */
- phy->ops.identify = &ixgbe_identify_phy_generic;
- phy->ops.reset = &ixgbe_reset_phy_generic;
- phy->ops.read_reg = &ixgbe_read_phy_reg_generic;
- phy->ops.write_reg = &ixgbe_write_phy_reg_generic;
- phy->ops.setup_link = &ixgbe_setup_phy_link_generic;
- phy->ops.setup_link_speed = &ixgbe_setup_phy_link_speed_generic;
+ phy->ops.identify = ixgbe_identify_phy_generic;
+ phy->ops.reset = ixgbe_reset_phy_generic;
+ phy->ops.read_reg = ixgbe_read_phy_reg_generic;
+ phy->ops.write_reg = ixgbe_write_phy_reg_generic;
+ phy->ops.read_reg_mdi = ixgbe_read_phy_reg_mdi;
+ phy->ops.write_reg_mdi = ixgbe_write_phy_reg_mdi;
+ phy->ops.setup_link = ixgbe_setup_phy_link_generic;
+ phy->ops.setup_link_speed = ixgbe_setup_phy_link_speed_generic;
phy->ops.check_link = NULL;
phy->ops.get_firmware_version = ixgbe_get_phy_firmware_version_generic;
- phy->ops.read_i2c_byte = &ixgbe_read_i2c_byte_generic;
- phy->ops.write_i2c_byte = &ixgbe_write_i2c_byte_generic;
- phy->ops.read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic;
- phy->ops.write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic;
- phy->ops.i2c_bus_clear = &ixgbe_i2c_bus_clear;
- phy->ops.identify_sfp = &ixgbe_identify_module_generic;
+ phy->ops.read_i2c_byte = ixgbe_read_i2c_byte_generic;
+ phy->ops.write_i2c_byte = ixgbe_write_i2c_byte_generic;
+ phy->ops.read_i2c_sff8472 = ixgbe_read_i2c_sff8472_generic;
+ phy->ops.read_i2c_eeprom = ixgbe_read_i2c_eeprom_generic;
+ phy->ops.write_i2c_eeprom = ixgbe_write_i2c_eeprom_generic;
+ phy->ops.i2c_bus_clear = ixgbe_i2c_bus_clear;
+ phy->ops.identify_sfp = ixgbe_identify_module_generic;
phy->sfp_type = ixgbe_sfp_type_unknown;
- phy->ops.check_overtemp = &ixgbe_tn_check_overtemp;
+ phy->ops.read_i2c_combined = ixgbe_read_i2c_combined_generic;
+ phy->ops.write_i2c_combined = ixgbe_write_i2c_combined_generic;
+ phy->ops.read_i2c_combined_unlocked =
+ ixgbe_read_i2c_combined_generic_unlocked;
+ phy->ops.write_i2c_combined_unlocked =
+ ixgbe_write_i2c_combined_generic_unlocked;
+ phy->ops.read_i2c_byte_unlocked = ixgbe_read_i2c_byte_generic_unlocked;
+ phy->ops.write_i2c_byte_unlocked =
+ ixgbe_write_i2c_byte_generic_unlocked;
+ phy->ops.check_overtemp = ixgbe_tn_check_overtemp;
return IXGBE_SUCCESS;
}
/**
* ixgbe_identify_phy_generic - Get physical layer module
@@ -92,15 +363,22 @@
u32 phy_addr;
u16 ext_ability = 0;
DEBUGFUNC("ixgbe_identify_phy_generic");
+ if (!hw->phy.phy_semaphore_mask) {
+ if (hw->bus.lan_id)
+ hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM;
+ else
+ hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM;
+ }
+
if (hw->phy.type == ixgbe_phy_unknown) {
for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
if (ixgbe_validate_phy_addr(hw, phy_addr)) {
hw->phy.addr = phy_addr;
- (void) ixgbe_get_phy_id(hw);
+ ixgbe_get_phy_id(hw);
hw->phy.type =
ixgbe_get_phy_type_from_id(hw->phy.id);
if (hw->phy.type == ixgbe_phy_unknown) {
hw->phy.ops.read_reg(hw,
@@ -119,21 +397,55 @@
status = IXGBE_SUCCESS;
break;
}
}
- /* clear value if nothing found */
- if (status != IXGBE_SUCCESS)
+
+ /* Certain media types do not have a phy so an address will not
+ * be found and the code will take this path. Caller has to
+ * decide if it is an error or not.
+ */
+ if (status != IXGBE_SUCCESS) {
hw->phy.addr = 0;
+ }
} else {
status = IXGBE_SUCCESS;
}
return status;
}
/**
+ * ixgbe_check_reset_blocked - check status of MNG FW veto bit
+ * @hw: pointer to the hardware structure
+ *
+ * This function checks the MMNGC.MNG_VETO bit to see if there are
+ * any constraints on link from manageability. For MAC's that don't
+ * have this bit just return faluse since the link can not be blocked
+ * via this method.
+ **/
+s32 ixgbe_check_reset_blocked(struct ixgbe_hw *hw)
+{
+ u32 mmngc;
+
+ DEBUGFUNC("ixgbe_check_reset_blocked");
+
+ /* If we don't have this bit, it can't be blocking */
+ if (hw->mac.type == ixgbe_mac_82598EB)
+ return FALSE;
+
+ mmngc = IXGBE_READ_REG(hw, IXGBE_MMNGC);
+ if (mmngc & IXGBE_MMNGC_MNG_VETO) {
+ ERROR_REPORT1(IXGBE_ERROR_SOFTWARE,
+ "MNG_VETO bit detected.\n");
+ return TRUE;
+ }
+
+ return FALSE;
+}
+
+/**
* ixgbe_validate_phy_addr - Determines phy address is valid
* @hw: pointer to hardware structure
*
**/
bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr)
@@ -194,19 +506,25 @@
switch (phy_id) {
case TN1010_PHY_ID:
phy_type = ixgbe_phy_tn;
break;
+ case X550_PHY_ID1:
+ case X550_PHY_ID2:
+ case X550_PHY_ID3:
case X540_PHY_ID:
phy_type = ixgbe_phy_aq;
break;
case QT2022_PHY_ID:
phy_type = ixgbe_phy_qt;
break;
case ATH_PHY_ID:
phy_type = ixgbe_phy_nl;
break;
+ case X557_PHY_ID:
+ phy_type = ixgbe_phy_x550em_ext_t;
+ break;
default:
phy_type = ixgbe_phy_unknown;
break;
}
@@ -235,10 +553,14 @@
/* Don't reset PHY if it's shut down due to overtemp. */
if (!hw->phy.reset_if_overtemp &&
(IXGBE_ERR_OVERTEMP == hw->phy.ops.check_overtemp(hw)))
goto out;
+ /* Blocked by MNG FW so bail */
+ if (ixgbe_check_reset_blocked(hw))
+ goto out;
+
/*
* Perform soft PHY reset to the PHY_XS.
* This will cause a soft reset to the PHY
*/
hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
@@ -260,43 +582,30 @@
}
}
if (ctrl & IXGBE_MDIO_PHY_XS_RESET) {
status = IXGBE_ERR_RESET_FAILED;
- DEBUGOUT("PHY reset polling failed to complete.\n");
+ ERROR_REPORT1(IXGBE_ERROR_POLLING,
+ "PHY reset polling failed to complete.\n");
}
out:
return status;
}
/**
- * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register
+ * ixgbe_read_phy_mdi - Reads a value from a specified PHY register without
+ * the SWFW lock
* @hw: pointer to hardware structure
* @reg_addr: 32 bit address of PHY register to read
* @phy_data: Pointer to read data from PHY register
**/
-s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
- u32 device_type, u16 *phy_data)
+s32 ixgbe_read_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
+ u16 *phy_data)
{
- u32 command;
- u32 i;
- u32 data;
- s32 status = IXGBE_SUCCESS;
- u16 gssr;
+ u32 i, data, command;
- DEBUGFUNC("ixgbe_read_phy_reg_generic");
-
- if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
- gssr = IXGBE_GSSR_PHY1_SM;
- else
- gssr = IXGBE_GSSR_PHY0_SM;
-
- if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != IXGBE_SUCCESS)
- status = IXGBE_ERR_SWFW_SYNC;
-
- if (status == IXGBE_SUCCESS) {
/* Setup and write the address cycle command */
command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
(device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
(hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
(IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
@@ -310,21 +619,20 @@
*/
for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
usec_delay(10);
command = IXGBE_READ_REG(hw, IXGBE_MSCA);
-
if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
break;
}
+
if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
- DEBUGOUT("PHY address command did not complete.\n");
- status = IXGBE_ERR_PHY;
+ ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY address command did not complete.\n");
+ return IXGBE_ERR_PHY;
}
- if (status == IXGBE_SUCCESS) {
/*
* Address cycle complete, setup and write the read
* command
*/
command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
@@ -341,61 +649,69 @@
*/
for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
usec_delay(10);
command = IXGBE_READ_REG(hw, IXGBE_MSCA);
-
if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
break;
}
if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
- DEBUGOUT("PHY read command didn't complete\n");
- status = IXGBE_ERR_PHY;
- } else {
+ ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY read command didn't complete\n");
+ return IXGBE_ERR_PHY;
+ }
+
/*
* Read operation is complete. Get the data
* from MSRWD
*/
data = IXGBE_READ_REG(hw, IXGBE_MSRWD);
data >>= IXGBE_MSRWD_READ_DATA_SHIFT;
*phy_data = (u16)(data);
- }
- }
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register
+ * using the SWFW lock - this function is needed in most cases
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit address of PHY register to read
+ * @phy_data: Pointer to read data from PHY register
+ **/
+s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 *phy_data)
+{
+ s32 status;
+ u32 gssr = hw->phy.phy_semaphore_mask;
+
+ DEBUGFUNC("ixgbe_read_phy_reg_generic");
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == IXGBE_SUCCESS) {
+ status = ixgbe_read_phy_reg_mdi(hw, reg_addr, device_type,
+ phy_data);
hw->mac.ops.release_swfw_sync(hw, gssr);
+ } else {
+ status = IXGBE_ERR_SWFW_SYNC;
}
return status;
}
/**
- * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register
+ * ixgbe_write_phy_reg_mdi - Writes a value to specified PHY register
+ * without SWFW lock
* @hw: pointer to hardware structure
* @reg_addr: 32 bit PHY register to write
* @device_type: 5 bit device type
* @phy_data: Data to write to the PHY register
**/
-s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+s32 ixgbe_write_phy_reg_mdi(struct ixgbe_hw *hw, u32 reg_addr,
u32 device_type, u16 phy_data)
{
- u32 command;
- u32 i;
- s32 status = IXGBE_SUCCESS;
- u16 gssr;
+ u32 i, command;
- DEBUGFUNC("ixgbe_write_phy_reg_generic");
-
- if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
- gssr = IXGBE_GSSR_PHY1_SM;
- else
- gssr = IXGBE_GSSR_PHY0_SM;
-
- if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != IXGBE_SUCCESS)
- status = IXGBE_ERR_SWFW_SYNC;
-
- if (status == IXGBE_SUCCESS) {
/* Put the data in the MDI single read and write data register*/
IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data);
/* Setup and write the address cycle command */
command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
@@ -412,21 +728,19 @@
*/
for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
usec_delay(10);
command = IXGBE_READ_REG(hw, IXGBE_MSCA);
-
if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
break;
}
if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
- DEBUGOUT("PHY address cmd didn't complete\n");
- status = IXGBE_ERR_PHY;
+ ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY address cmd didn't complete\n");
+ return IXGBE_ERR_PHY;
}
- if (status == IXGBE_SUCCESS) {
/*
* Address cycle complete, setup and write the write
* command
*/
command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) |
@@ -443,48 +757,65 @@
*/
for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) {
usec_delay(10);
command = IXGBE_READ_REG(hw, IXGBE_MSCA);
-
if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
break;
}
if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
- DEBUGOUT("PHY address cmd didn't complete\n");
- status = IXGBE_ERR_PHY;
+ ERROR_REPORT1(IXGBE_ERROR_POLLING, "PHY write cmd didn't complete\n");
+ return IXGBE_ERR_PHY;
}
- }
+ return IXGBE_SUCCESS;
+}
+
+/**
+ * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register
+ * using SWFW lock- this function is needed in most cases
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: 5 bit device type
+ * @phy_data: Data to write to the PHY register
+ **/
+s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u16 phy_data)
+{
+ s32 status;
+ u32 gssr = hw->phy.phy_semaphore_mask;
+
+ DEBUGFUNC("ixgbe_write_phy_reg_generic");
+
+ if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == IXGBE_SUCCESS) {
+ status = ixgbe_write_phy_reg_mdi(hw, reg_addr, device_type,
+ phy_data);
hw->mac.ops.release_swfw_sync(hw, gssr);
+ } else {
+ status = IXGBE_ERR_SWFW_SYNC;
}
return status;
}
/**
- * ixgbe_setup_phy_link_generic - Set and restart autoneg
+ * ixgbe_setup_phy_link_generic - Set and restart auto-neg
* @hw: pointer to hardware structure
*
- * Restart autonegotiation and PHY and waits for completion.
+ * Restart auto-negotiation and PHY and waits for completion.
**/
s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw)
{
- s32 status;
- u32 time_out;
- u32 max_time_out = 10;
+ s32 status = IXGBE_SUCCESS;
u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
bool autoneg = FALSE;
ixgbe_link_speed speed;
DEBUGFUNC("ixgbe_setup_phy_link_generic");
- status =
ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg);
- if (status != IXGBE_SUCCESS)
- return status;
if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
/* Set or unset auto-negotiation 10G advertisement */
hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
@@ -497,10 +828,48 @@
hw->phy.ops.write_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
autoneg_reg);
}
+ if (hw->mac.type == ixgbe_mac_X550) {
+ if (speed & IXGBE_LINK_SPEED_5GB_FULL) {
+ /* Set or unset auto-negotiation 5G advertisement */
+ hw->phy.ops.read_reg(hw,
+ IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ autoneg_reg &= ~IXGBE_MII_5GBASE_T_ADVERTISE;
+ if (hw->phy.autoneg_advertised &
+ IXGBE_LINK_SPEED_5GB_FULL)
+ autoneg_reg |= IXGBE_MII_5GBASE_T_ADVERTISE;
+
+ hw->phy.ops.write_reg(hw,
+ IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
+ }
+
+ if (speed & IXGBE_LINK_SPEED_2_5GB_FULL) {
+ /* Set or unset auto-negotiation 2.5G advertisement */
+ hw->phy.ops.read_reg(hw,
+ IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ &autoneg_reg);
+
+ autoneg_reg &= ~IXGBE_MII_2_5GBASE_T_ADVERTISE;
+ if (hw->phy.autoneg_advertised &
+ IXGBE_LINK_SPEED_2_5GB_FULL)
+ autoneg_reg |= IXGBE_MII_2_5GBASE_T_ADVERTISE;
+
+ hw->phy.ops.write_reg(hw,
+ IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
+ IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+ autoneg_reg);
+ }
+ }
+
if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
/* Set or unset auto-negotiation 1G advertisement */
hw->phy.ops.read_reg(hw,
IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG,
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
@@ -530,52 +899,36 @@
hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
autoneg_reg);
}
- /* Restart PHY autonegotiation and wait for completion */
+ /* Blocked by MNG FW so don't reset PHY */
+ if (ixgbe_check_reset_blocked(hw))
+ return status;
+
+ /* Restart PHY auto-negotiation. */
hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
autoneg_reg |= IXGBE_MII_RESTART;
hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
- /* Wait for autonegotiation to finish */
- for (time_out = 0; time_out < max_time_out; time_out++) {
- usec_delay(10);
- /* Restart PHY autonegotiation and wait for completion */
- status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- &autoneg_reg);
-
- autoneg_reg &= IXGBE_MII_AUTONEG_COMPLETE;
- if (autoneg_reg == IXGBE_MII_AUTONEG_COMPLETE)
- break;
- }
-
- if (time_out == max_time_out) {
- status = IXGBE_ERR_LINK_SETUP;
- DEBUGOUT("ixgbe_setup_phy_link_generic: time out");
- }
-
return status;
}
/**
* ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
* @hw: pointer to hardware structure
* @speed: new link speed
- * @autoneg: TRUE if autonegotiation enabled
**/
s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
- bool autoneg,
bool autoneg_wait_to_complete)
{
- UNREFERENCED_2PARAMETER(autoneg, autoneg_wait_to_complete);
+ UNREFERENCED_1PARAMETER(autoneg_wait_to_complete);
DEBUGFUNC("ixgbe_setup_phy_link_speed_generic");
/*
* Clear autoneg_advertised and set new values based on input link
@@ -584,59 +937,91 @@
hw->phy.autoneg_advertised = 0;
if (speed & IXGBE_LINK_SPEED_10GB_FULL)
hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+ if (speed & IXGBE_LINK_SPEED_5GB_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_5GB_FULL;
+
+ if (speed & IXGBE_LINK_SPEED_2_5GB_FULL)
+ hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_2_5GB_FULL;
+
if (speed & IXGBE_LINK_SPEED_1GB_FULL)
hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
if (speed & IXGBE_LINK_SPEED_100_FULL)
hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL;
/* Setup link based on the new speed settings */
- hw->phy.ops.setup_link(hw);
+ ixgbe_setup_phy_link(hw);
return IXGBE_SUCCESS;
}
/**
- * ixgbe_get_copper_link_capabilities_generic - Determines link capabilities
+ * ixgbe_get_copper_speeds_supported - Get copper link speeds from phy
* @hw: pointer to hardware structure
- * @speed: pointer to link speed
- * @autoneg: boolean auto-negotiation value
*
- * Determines the link capabilities by reading the AUTOC register.
+ * Determines the supported link capabilities by reading the PHY auto
+ * negotiation register.
**/
-s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
- ixgbe_link_speed *speed,
- bool *autoneg)
+static s32 ixgbe_get_copper_speeds_supported(struct ixgbe_hw *hw)
{
- s32 status = IXGBE_ERR_LINK_SETUP;
+ s32 status;
u16 speed_ability;
- DEBUGFUNC("ixgbe_get_copper_link_capabilities_generic");
-
- *speed = 0;
- *autoneg = TRUE;
-
status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY,
IXGBE_MDIO_PMA_PMD_DEV_TYPE,
&speed_ability);
+ if (status)
+ return status;
- if (status == IXGBE_SUCCESS) {
if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G)
- *speed |= IXGBE_LINK_SPEED_10GB_FULL;
+ hw->phy.speeds_supported |= IXGBE_LINK_SPEED_10GB_FULL;
if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G)
- *speed |= IXGBE_LINK_SPEED_1GB_FULL;
+ hw->phy.speeds_supported |= IXGBE_LINK_SPEED_1GB_FULL;
if (speed_ability & IXGBE_MDIO_PHY_SPEED_100M)
- *speed |= IXGBE_LINK_SPEED_100_FULL;
+ hw->phy.speeds_supported |= IXGBE_LINK_SPEED_100_FULL;
+
+ switch (hw->mac.type) {
+ case ixgbe_mac_X550:
+ hw->phy.speeds_supported |= IXGBE_LINK_SPEED_2_5GB_FULL;
+ hw->phy.speeds_supported |= IXGBE_LINK_SPEED_5GB_FULL;
+ break;
+ case ixgbe_mac_X550EM_x:
+ hw->phy.speeds_supported &= ~IXGBE_LINK_SPEED_100_FULL;
+ break;
+ default:
+ break;
}
return status;
}
/**
+ * ixgbe_get_copper_link_capabilities_generic - Determines link capabilities
+ * @hw: pointer to hardware structure
+ * @speed: pointer to link speed
+ * @autoneg: boolean auto-negotiation value
+ **/
+s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw,
+ ixgbe_link_speed *speed,
+ bool *autoneg)
+{
+ s32 status = IXGBE_SUCCESS;
+
+ DEBUGFUNC("ixgbe_get_copper_link_capabilities_generic");
+
+ *autoneg = TRUE;
+ if (!hw->phy.speeds_supported)
+ status = ixgbe_get_copper_speeds_supported(hw);
+
+ *speed = hw->phy.speeds_supported;
+ return status;
+}
+
+/**
* ixgbe_check_phy_link_tnx - Determine link and speed status
* @hw: pointer to hardware structure
*
* Reads the VS1 register to determine if link is up and the current speed for
* the PHY.
@@ -682,30 +1067,25 @@
return status;
}
/**
- * ixgbe_setup_phy_link_tnx - Set and restart autoneg
+ * ixgbe_setup_phy_link_tnx - Set and restart auto-neg
* @hw: pointer to hardware structure
*
- * Restart autonegotiation and PHY and waits for completion.
+ * Restart auto-negotiation and PHY and waits for completion.
**/
s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw)
{
- s32 status;
- u32 time_out;
- u32 max_time_out = 10;
+ s32 status = IXGBE_SUCCESS;
u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
bool autoneg = FALSE;
ixgbe_link_speed speed;
DEBUGFUNC("ixgbe_setup_phy_link_tnx");
- status =
ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg);
- if (status != IXGBE_SUCCESS)
- return status;
if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
/* Set or unset auto-negotiation 10G advertisement */
hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG,
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
@@ -748,37 +1128,23 @@
hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_ADVERTISE_REG,
IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
autoneg_reg);
}
- /* Restart PHY autonegotiation and wait for completion */
+ /* Blocked by MNG FW so don't reset PHY */
+ if (ixgbe_check_reset_blocked(hw))
+ return status;
+
+ /* Restart PHY auto-negotiation. */
hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &autoneg_reg);
autoneg_reg |= IXGBE_MII_RESTART;
hw->phy.ops.write_reg(hw, IXGBE_MDIO_AUTO_NEG_CONTROL,
IXGBE_MDIO_AUTO_NEG_DEV_TYPE, autoneg_reg);
- /* Wait for autonegotiation to finish */
- for (time_out = 0; time_out < max_time_out; time_out++) {
- usec_delay(10);
- /* Restart PHY autonegotiation and wait for completion */
- status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
- IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
- &autoneg_reg);
-
- autoneg_reg &= IXGBE_MII_AUTONEG_COMPLETE;
- if (autoneg_reg == IXGBE_MII_AUTONEG_COMPLETE)
- break;
- }
-
- if (time_out == max_time_out) {
- status = IXGBE_ERR_LINK_SETUP;
- DEBUGOUT("ixgbe_setup_phy_link_tnx: time out");
- }
-
return status;
}
/**
* ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version
@@ -786,11 +1152,11 @@
* @firmware_version: pointer to the PHY Firmware Version
**/
s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
u16 *firmware_version)
{
- s32 status = IXGBE_SUCCESS;
+ s32 status;
DEBUGFUNC("ixgbe_get_phy_firmware_version_tnx");
status = hw->phy.ops.read_reg(hw, TNX_FW_REV,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
@@ -805,11 +1171,11 @@
* @firmware_version: pointer to the PHY Firmware Version
**/
s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw,
u16 *firmware_version)
{
- s32 status = IXGBE_SUCCESS;
+ s32 status;
DEBUGFUNC("ixgbe_get_phy_firmware_version_generic");
status = hw->phy.ops.read_reg(hw, AQ_FW_REV,
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
@@ -831,10 +1197,14 @@
s32 ret_val = IXGBE_SUCCESS;
u32 i;
DEBUGFUNC("ixgbe_reset_phy_nl");
+ /* Blocked by MNG FW so bail */
+ if (ixgbe_check_reset_blocked(hw))
+ goto out;
+
hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
IXGBE_MDIO_PHY_XS_DEV_TYPE, &phy_data);
/* reset the PHY and poll for completion */
hw->phy.ops.write_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
@@ -866,10 +1236,12 @@
while (!end_data) {
/*
* Read control word from PHY init contents offset
*/
ret_val = hw->eeprom.ops.read(hw, data_offset, &eword);
+ if (ret_val)
+ goto err_eeprom;
control = (eword & IXGBE_CONTROL_MASK_NL) >>
IXGBE_CONTROL_SHIFT_NL;
edata = eword & IXGBE_DATA_MASK_NL;
switch (control) {
case IXGBE_DELAY_NL:
@@ -878,14 +1250,20 @@
msec_delay(edata);
break;
case IXGBE_DATA_NL:
DEBUGOUT("DATA:\n");
data_offset++;
- hw->eeprom.ops.read(hw, data_offset++,
+ ret_val = hw->eeprom.ops.read(hw, data_offset,
&phy_offset);
+ if (ret_val)
+ goto err_eeprom;
+ data_offset++;
for (i = 0; i < edata; i++) {
- hw->eeprom.ops.read(hw, data_offset, &eword);
+ ret_val = hw->eeprom.ops.read(hw, data_offset,
+ &eword);
+ if (ret_val)
+ goto err_eeprom;
hw->phy.ops.write_reg(hw, phy_offset,
IXGBE_TWINAX_DEV, eword);
DEBUGOUT2("Wrote %4.4x to %4.4x\n", eword,
phy_offset);
data_offset++;
@@ -913,10 +1291,15 @@
}
}
out:
return ret_val;
+
+err_eeprom:
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom read at offset %d failed", data_offset);
+ return IXGBE_ERR_PHY;
}
/**
* ixgbe_identify_module_generic - Identifies module type
* @hw: pointer to hardware structure
@@ -932,10 +1315,13 @@
switch (hw->mac.ops.get_media_type(hw)) {
case ixgbe_media_type_fiber:
status = ixgbe_identify_sfp_module_generic(hw);
break;
+ case ixgbe_media_type_fiber_qsfp:
+ status = ixgbe_identify_qsfp_module_generic(hw);
+ break;
default:
hw->phy.sfp_type = ixgbe_sfp_type_not_present;
status = IXGBE_ERR_SFP_NOT_PRESENT;
break;
@@ -969,50 +1355,42 @@
hw->phy.sfp_type = ixgbe_sfp_type_not_present;
status = IXGBE_ERR_SFP_NOT_PRESENT;
goto out;
}
+ /* LAN ID is needed for I2C access */
+ hw->mac.ops.set_lan_id(hw);
+
status = hw->phy.ops.read_i2c_eeprom(hw,
IXGBE_SFF_IDENTIFIER,
&identifier);
- if (status == IXGBE_ERR_SWFW_SYNC ||
- status == IXGBE_ERR_I2C ||
- status == IXGBE_ERR_SFP_NOT_PRESENT)
+ if (status != IXGBE_SUCCESS)
goto err_read_i2c_eeprom;
- /* LAN ID is needed for sfp_type determination */
- hw->mac.ops.set_lan_id(hw);
-
if (identifier != IXGBE_SFF_IDENTIFIER_SFP) {
hw->phy.type = ixgbe_phy_sfp_unsupported;
status = IXGBE_ERR_SFP_NOT_SUPPORTED;
} else {
status = hw->phy.ops.read_i2c_eeprom(hw,
IXGBE_SFF_1GBE_COMP_CODES,
&comp_codes_1g);
- if (status == IXGBE_ERR_SWFW_SYNC ||
- status == IXGBE_ERR_I2C ||
- status == IXGBE_ERR_SFP_NOT_PRESENT)
+ if (status != IXGBE_SUCCESS)
goto err_read_i2c_eeprom;
status = hw->phy.ops.read_i2c_eeprom(hw,
IXGBE_SFF_10GBE_COMP_CODES,
&comp_codes_10g);
- if (status == IXGBE_ERR_SWFW_SYNC ||
- status == IXGBE_ERR_I2C ||
- status == IXGBE_ERR_SFP_NOT_PRESENT)
+ if (status != IXGBE_SUCCESS)
goto err_read_i2c_eeprom;
status = hw->phy.ops.read_i2c_eeprom(hw,
IXGBE_SFF_CABLE_TECHNOLOGY,
&cable_tech);
- if (status == IXGBE_ERR_SWFW_SYNC ||
- status == IXGBE_ERR_I2C ||
- status == IXGBE_ERR_SFP_NOT_PRESENT)
+ if (status != IXGBE_SUCCESS)
goto err_read_i2c_eeprom;
/* ID Module
* =========
* 0 SFP_DA_CU
@@ -1036,11 +1414,11 @@
hw->phy.sfp_type = ixgbe_sfp_type_sr;
else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
hw->phy.sfp_type = ixgbe_sfp_type_lr;
else
hw->phy.sfp_type = ixgbe_sfp_type_unknown;
- } else if (hw->mac.type == ixgbe_mac_82599EB) {
+ } else {
if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) {
if (hw->bus.lan_id == 0)
hw->phy.sfp_type =
ixgbe_sfp_type_da_cu_core0;
else
@@ -1113,31 +1491,25 @@
hw->phy.id = identifier;
status = hw->phy.ops.read_i2c_eeprom(hw,
IXGBE_SFF_VENDOR_OUI_BYTE0,
&oui_bytes[0]);
- if (status == IXGBE_ERR_SWFW_SYNC ||
- status == IXGBE_ERR_I2C ||
- status == IXGBE_ERR_SFP_NOT_PRESENT)
+ if (status != IXGBE_SUCCESS)
goto err_read_i2c_eeprom;
status = hw->phy.ops.read_i2c_eeprom(hw,
IXGBE_SFF_VENDOR_OUI_BYTE1,
&oui_bytes[1]);
- if (status == IXGBE_ERR_SWFW_SYNC ||
- status == IXGBE_ERR_I2C ||
- status == IXGBE_ERR_SFP_NOT_PRESENT)
+ if (status != IXGBE_SUCCESS)
goto err_read_i2c_eeprom;
status = hw->phy.ops.read_i2c_eeprom(hw,
IXGBE_SFF_VENDOR_OUI_BYTE2,
&oui_bytes[2]);
- if (status == IXGBE_ERR_SWFW_SYNC ||
- status == IXGBE_ERR_I2C ||
- status == IXGBE_ERR_SFP_NOT_PRESENT)
+ if (status != IXGBE_SUCCESS)
goto err_read_i2c_eeprom;
vendor_oui =
((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) |
(oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) |
@@ -1198,11 +1570,11 @@
if (hw->mac.type == ixgbe_mac_82598EB) {
status = IXGBE_SUCCESS;
goto out;
}
- (void) ixgbe_get_device_caps(hw, &enforce_sfp);
+ ixgbe_get_device_caps(hw, &enforce_sfp);
if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP) &&
!(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
@@ -1223,12 +1595,11 @@
"Corporation is not responsible "
"for any harm caused by using "
"untested modules.\n", status);
status = IXGBE_SUCCESS;
} else {
- EWARN(hw, "SFP+ module not supported\n",
- status);
+ DEBUGOUT("SFP+ module not supported\n");
hw->phy.type =
ixgbe_phy_sfp_unsupported;
status = IXGBE_ERR_SFP_NOT_SUPPORTED;
}
}
@@ -1247,13 +1618,273 @@
hw->phy.type = ixgbe_phy_unknown;
}
return IXGBE_ERR_SFP_NOT_PRESENT;
}
+/**
+ * ixgbe_get_supported_phy_sfp_layer_generic - Returns physical layer type
+ * @hw: pointer to hardware structure
+ *
+ * Determines physical layer capabilities of the current SFP.
+ */
+s32 ixgbe_get_supported_phy_sfp_layer_generic(struct ixgbe_hw *hw)
+{
+ u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN;
+ u8 comp_codes_10g = 0;
+ u8 comp_codes_1g = 0;
+ DEBUGFUNC("ixgbe_get_supported_phy_sfp_layer_generic");
+ hw->phy.ops.identify_sfp(hw);
+ if (hw->phy.sfp_type == ixgbe_sfp_type_not_present)
+ return physical_layer;
+
+ switch (hw->phy.type) {
+ case ixgbe_phy_sfp_passive_tyco:
+ case ixgbe_phy_sfp_passive_unknown:
+ case ixgbe_phy_qsfp_passive_unknown:
+ physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU;
+ break;
+ case ixgbe_phy_sfp_ftl_active:
+ case ixgbe_phy_sfp_active_unknown:
+ case ixgbe_phy_qsfp_active_unknown:
+ physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA;
+ break;
+ case ixgbe_phy_sfp_avago:
+ case ixgbe_phy_sfp_ftl:
+ case ixgbe_phy_sfp_intel:
+ case ixgbe_phy_sfp_unknown:
+ hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g);
+ hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g);
+ if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+ else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+ else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T;
+ else if (comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_SX;
+ break;
+ case ixgbe_phy_qsfp_intel:
+ case ixgbe_phy_qsfp_unknown:
+ hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_10GBE_COMP, &comp_codes_10g);
+ if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR;
+ else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)
+ physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR;
+ break;
+ default:
+ break;
+ }
+
+ return physical_layer;
+}
+
/**
+ * ixgbe_identify_qsfp_module_generic - Identifies QSFP modules
+ * @hw: pointer to hardware structure
+ *
+ * Searches for and identifies the QSFP module and assigns appropriate PHY type
+ **/
+s32 ixgbe_identify_qsfp_module_generic(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+ u32 vendor_oui = 0;
+ enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type;
+ u8 identifier = 0;
+ u8 comp_codes_1g = 0;
+ u8 comp_codes_10g = 0;
+ u8 oui_bytes[3] = {0, 0, 0};
+ u16 enforce_sfp = 0;
+ u8 connector = 0;
+ u8 cable_length = 0;
+ u8 device_tech = 0;
+ bool active_cable = FALSE;
+
+ DEBUGFUNC("ixgbe_identify_qsfp_module_generic");
+
+ if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber_qsfp) {
+ hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+ status = IXGBE_ERR_SFP_NOT_PRESENT;
+ goto out;
+ }
+
+ /* LAN ID is needed for I2C access */
+ hw->mac.ops.set_lan_id(hw);
+
+ status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_IDENTIFIER,
+ &identifier);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ if (identifier != IXGBE_SFF_IDENTIFIER_QSFP_PLUS) {
+ hw->phy.type = ixgbe_phy_sfp_unsupported;
+ status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ goto out;
+ }
+
+ hw->phy.id = identifier;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_10GBE_COMP,
+ &comp_codes_10g);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_QSFP_1GBE_COMP,
+ &comp_codes_1g);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ if (comp_codes_10g & IXGBE_SFF_QSFP_DA_PASSIVE_CABLE) {
+ hw->phy.type = ixgbe_phy_qsfp_passive_unknown;
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core0;
+ else
+ hw->phy.sfp_type = ixgbe_sfp_type_da_cu_core1;
+ } else if (comp_codes_10g & (IXGBE_SFF_10GBASESR_CAPABLE |
+ IXGBE_SFF_10GBASELR_CAPABLE)) {
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type = ixgbe_sfp_type_srlr_core0;
+ else
+ hw->phy.sfp_type = ixgbe_sfp_type_srlr_core1;
+ } else {
+ if (comp_codes_10g & IXGBE_SFF_QSFP_DA_ACTIVE_CABLE)
+ active_cable = TRUE;
+
+ if (!active_cable) {
+ /* check for active DA cables that pre-date
+ * SFF-8436 v3.6 */
+ hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_CONNECTOR,
+ &connector);
+
+ hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_CABLE_LENGTH,
+ &cable_length);
+
+ hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_DEVICE_TECH,
+ &device_tech);
+
+ if ((connector ==
+ IXGBE_SFF_QSFP_CONNECTOR_NOT_SEPARABLE) &&
+ (cable_length > 0) &&
+ ((device_tech >> 4) ==
+ IXGBE_SFF_QSFP_TRANSMITER_850NM_VCSEL))
+ active_cable = TRUE;
+ }
+
+ if (active_cable) {
+ hw->phy.type = ixgbe_phy_qsfp_active_unknown;
+ if (hw->bus.lan_id == 0)
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_da_act_lmt_core0;
+ else
+ hw->phy.sfp_type =
+ ixgbe_sfp_type_da_act_lmt_core1;
+ } else {
+ /* unsupported module type */
+ hw->phy.type = ixgbe_phy_sfp_unsupported;
+ status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ goto out;
+ }
+ }
+
+ if (hw->phy.sfp_type != stored_sfp_type)
+ hw->phy.sfp_setup_needed = TRUE;
+
+ /* Determine if the QSFP+ PHY is dual speed or not. */
+ hw->phy.multispeed_fiber = FALSE;
+ if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) &&
+ (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) ||
+ ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) &&
+ (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE)))
+ hw->phy.multispeed_fiber = TRUE;
+
+ /* Determine PHY vendor for optical modules */
+ if (comp_codes_10g & (IXGBE_SFF_10GBASESR_CAPABLE |
+ IXGBE_SFF_10GBASELR_CAPABLE)) {
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_VENDOR_OUI_BYTE0,
+ &oui_bytes[0]);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_VENDOR_OUI_BYTE1,
+ &oui_bytes[1]);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ status = hw->phy.ops.read_i2c_eeprom(hw,
+ IXGBE_SFF_QSFP_VENDOR_OUI_BYTE2,
+ &oui_bytes[2]);
+
+ if (status != IXGBE_SUCCESS)
+ goto err_read_i2c_eeprom;
+
+ vendor_oui =
+ ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) |
+ (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) |
+ (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT));
+
+ if (vendor_oui == IXGBE_SFF_VENDOR_OUI_INTEL)
+ hw->phy.type = ixgbe_phy_qsfp_intel;
+ else
+ hw->phy.type = ixgbe_phy_qsfp_unknown;
+
+ ixgbe_get_device_caps(hw, &enforce_sfp);
+ if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP)) {
+ /* Make sure we're a supported PHY type */
+ if (hw->phy.type == ixgbe_phy_qsfp_intel) {
+ status = IXGBE_SUCCESS;
+ } else {
+ if (hw->allow_unsupported_sfp == TRUE) {
+ EWARN(hw, "WARNING: Intel (R) Network "
+ "Connections are quality tested "
+ "using Intel (R) Ethernet Optics."
+ " Using untested modules is not "
+ "supported and may cause unstable"
+ " operation or damage to the "
+ "module or the adapter. Intel "
+ "Corporation is not responsible "
+ "for any harm caused by using "
+ "untested modules.\n", status);
+ status = IXGBE_SUCCESS;
+ } else {
+ DEBUGOUT("QSFP module not supported\n");
+ hw->phy.type =
+ ixgbe_phy_sfp_unsupported;
+ status = IXGBE_ERR_SFP_NOT_SUPPORTED;
+ }
+ }
+ } else {
+ status = IXGBE_SUCCESS;
+ }
+ }
+
+out:
+ return status;
+
+err_read_i2c_eeprom:
+ hw->phy.sfp_type = ixgbe_sfp_type_not_present;
+ hw->phy.id = 0;
+ hw->phy.type = ixgbe_phy_unknown;
+
+ return IXGBE_ERR_SFP_NOT_PRESENT;
+}
+
+
+/**
* ixgbe_get_sfp_init_sequence_offsets - Provides offset of PHY init sequence
* @hw: pointer to hardware structure
* @list_offset: offset to the SFP ID list
* @data_offset: offset to the SFP data block
*
@@ -1293,11 +1924,16 @@
sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
sfp_type == ixgbe_sfp_type_1g_sx_core1)
sfp_type = ixgbe_sfp_type_srlr_core1;
/* Read offset to PHY init contents */
- hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset);
+ if (hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset)) {
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom read at offset %d failed",
+ IXGBE_PHY_INIT_OFFSET_NL);
+ return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT;
+ }
if ((!*list_offset) || (*list_offset == 0xFFFF))
return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT;
/* Shift offset to first ID word */
@@ -1305,35 +1941,42 @@
/*
* Find the matching SFP ID in the EEPROM
* and program the init sequence
*/
- hw->eeprom.ops.read(hw, *list_offset, &sfp_id);
+ if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id))
+ goto err_phy;
while (sfp_id != IXGBE_PHY_INIT_END_NL) {
if (sfp_id == sfp_type) {
(*list_offset)++;
- hw->eeprom.ops.read(hw, *list_offset, data_offset);
+ if (hw->eeprom.ops.read(hw, *list_offset, data_offset))
+ goto err_phy;
if ((!*data_offset) || (*data_offset == 0xFFFF)) {
DEBUGOUT("SFP+ module not supported\n");
return IXGBE_ERR_SFP_NOT_SUPPORTED;
} else {
break;
}
} else {
(*list_offset) += 2;
if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id))
- return IXGBE_ERR_PHY;
+ goto err_phy;
}
}
if (sfp_id == IXGBE_PHY_INIT_END_NL) {
DEBUGOUT("No matching SFP+ module found\n");
return IXGBE_ERR_SFP_NOT_SUPPORTED;
}
return IXGBE_SUCCESS;
+
+err_phy:
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom read at offset %d failed", *list_offset);
+ return IXGBE_ERR_PHY;
}
/**
* ixgbe_read_i2c_eeprom_generic - Reads 8 bit EEPROM word over I2C interface
* @hw: pointer to hardware structure
@@ -1351,10 +1994,26 @@
IXGBE_I2C_EEPROM_DEV_ADDR,
eeprom_data);
}
/**
+ * ixgbe_read_i2c_sff8472_generic - Reads 8 bit word over I2C interface
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset at address 0xA2
+ * @eeprom_data: value read
+ *
+ * Performs byte read operation to SFP module's SFF-8472 data over I2C
+ **/
+static s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 *sff8472_data)
+{
+ return hw->phy.ops.read_i2c_byte(hw, byte_offset,
+ IXGBE_I2C_EEPROM_DEV_ADDR2,
+ sff8472_data);
+}
+
+/**
* ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface
* @hw: pointer to hardware structure
* @byte_offset: EEPROM byte offset to write
* @eeprom_data: value to write
*
@@ -1369,41 +2028,54 @@
IXGBE_I2C_EEPROM_DEV_ADDR,
eeprom_data);
}
/**
- * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C
+ * ixgbe_is_sfp_probe - Returns TRUE if SFP is being detected
* @hw: pointer to hardware structure
+ * @offset: eeprom offset to be read
+ * @addr: I2C address to be read
+ */
+static bool ixgbe_is_sfp_probe(struct ixgbe_hw *hw, u8 offset, u8 addr)
+{
+ if (addr == IXGBE_I2C_EEPROM_DEV_ADDR &&
+ offset == IXGBE_SFF_IDENTIFIER &&
+ hw->phy.sfp_type == ixgbe_sfp_type_not_present)
+ return TRUE;
+ return FALSE;
+}
+
+/**
+ * ixgbe_read_i2c_byte_generic_int - Reads 8 bit word over I2C
+ * @hw: pointer to hardware structure
* @byte_offset: byte offset to read
* @data: value read
+ * @lock: TRUE if to take and release semaphore
*
* Performs byte read operation to SFP module's EEPROM over I2C interface at
* a specified device address.
**/
-s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
- u8 dev_addr, u8 *data)
+static s32 ixgbe_read_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data, bool lock)
{
- s32 status = IXGBE_SUCCESS;
+ s32 status;
u32 max_retry = 10;
u32 retry = 0;
- u16 swfw_mask = 0;
+ u32 swfw_mask = hw->phy.phy_semaphore_mask;
bool nack = 1;
*data = 0;
DEBUGFUNC("ixgbe_read_i2c_byte_generic");
- if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
- swfw_mask = IXGBE_GSSR_PHY1_SM;
- else
- swfw_mask = IXGBE_GSSR_PHY0_SM;
+ if (hw->mac.type >= ixgbe_mac_X550)
+ max_retry = 3;
+ if (ixgbe_is_sfp_probe(hw, byte_offset, dev_addr))
+ max_retry = IXGBE_SFP_DETECT_RETRIES;
do {
- if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask)
- != IXGBE_SUCCESS) {
- status = IXGBE_ERR_SWFW_SYNC;
- goto read_byte_out;
- }
+ if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask))
+ return IXGBE_ERR_SWFW_SYNC;
ixgbe_i2c_start(hw);
/* Device Address and write indication */
status = ixgbe_clock_out_i2c_byte(hw, dev_addr);
@@ -1440,59 +2112,87 @@
status = ixgbe_clock_out_i2c_bit(hw, nack);
if (status != IXGBE_SUCCESS)
goto fail;
ixgbe_i2c_stop(hw);
- break;
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ return IXGBE_SUCCESS;
fail:
+ ixgbe_i2c_bus_clear(hw);
+ if (lock) {
hw->mac.ops.release_swfw_sync(hw, swfw_mask);
msec_delay(100);
- ixgbe_i2c_bus_clear(hw);
+ }
retry++;
if (retry < max_retry)
DEBUGOUT("I2C byte read error - Retrying.\n");
else
DEBUGOUT("I2C byte read error.\n");
} while (retry < max_retry);
- hw->mac.ops.release_swfw_sync(hw, swfw_mask);
-
-read_byte_out:
return status;
}
/**
- * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C
+ * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C
* @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @data: value read
+ *
+ * Performs byte read operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data)
+{
+ return ixgbe_read_i2c_byte_generic_int(hw, byte_offset, dev_addr,
+ data, TRUE);
+}
+
+/**
+ * ixgbe_read_i2c_byte_generic_unlocked - Reads 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to read
+ * @data: value read
+ *
+ * Performs byte read operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+s32 ixgbe_read_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 *data)
+{
+ return ixgbe_read_i2c_byte_generic_int(hw, byte_offset, dev_addr,
+ data, FALSE);
+}
+
+/**
+ * ixgbe_write_i2c_byte_generic_int - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
* @byte_offset: byte offset to write
* @data: value to write
+ * @lock: TRUE if to take and release semaphore
*
* Performs byte write operation to SFP module's EEPROM over I2C interface at
* a specified device address.
**/
-s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
- u8 dev_addr, u8 data)
+static s32 ixgbe_write_i2c_byte_generic_int(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data, bool lock)
{
- s32 status = IXGBE_SUCCESS;
+ s32 status;
u32 max_retry = 1;
u32 retry = 0;
- u16 swfw_mask = 0;
+ u32 swfw_mask = hw->phy.phy_semaphore_mask;
DEBUGFUNC("ixgbe_write_i2c_byte_generic");
- if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
- swfw_mask = IXGBE_GSSR_PHY1_SM;
- else
- swfw_mask = IXGBE_GSSR_PHY0_SM;
+ if (lock && hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) !=
+ IXGBE_SUCCESS)
+ return IXGBE_ERR_SWFW_SYNC;
- if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != IXGBE_SUCCESS) {
- status = IXGBE_ERR_SWFW_SYNC;
- goto write_byte_out;
- }
-
do {
ixgbe_i2c_start(hw);
status = ixgbe_clock_out_i2c_byte(hw, dev_addr);
if (status != IXGBE_SUCCESS)
@@ -1517,11 +2217,13 @@
status = ixgbe_get_i2c_ack(hw);
if (status != IXGBE_SUCCESS)
goto fail;
ixgbe_i2c_stop(hw);
- break;
+ if (lock)
+ hw->mac.ops.release_swfw_sync(hw, swfw_mask);
+ return IXGBE_SUCCESS;
fail:
ixgbe_i2c_bus_clear(hw);
retry++;
if (retry < max_retry)
@@ -1528,36 +2230,71 @@
DEBUGOUT("I2C byte write error - Retrying.\n");
else
DEBUGOUT("I2C byte write error.\n");
} while (retry < max_retry);
+ if (lock)
hw->mac.ops.release_swfw_sync(hw, swfw_mask);
-write_byte_out:
return status;
}
/**
+ * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @data: value to write
+ *
+ * Performs byte write operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data)
+{
+ return ixgbe_write_i2c_byte_generic_int(hw, byte_offset, dev_addr,
+ data, TRUE);
+}
+
+/**
+ * ixgbe_write_i2c_byte_generic_unlocked - Writes 8 bit word over I2C
+ * @hw: pointer to hardware structure
+ * @byte_offset: byte offset to write
+ * @data: value to write
+ *
+ * Performs byte write operation to SFP module's EEPROM over I2C interface at
+ * a specified device address.
+ **/
+s32 ixgbe_write_i2c_byte_generic_unlocked(struct ixgbe_hw *hw, u8 byte_offset,
+ u8 dev_addr, u8 data)
+{
+ return ixgbe_write_i2c_byte_generic_int(hw, byte_offset, dev_addr,
+ data, FALSE);
+}
+
+/**
* ixgbe_i2c_start - Sets I2C start condition
* @hw: pointer to hardware structure
*
* Sets I2C start condition (High -> Low on SDA while SCL is High)
+ * Set bit-bang mode on X550 hardware.
**/
static void ixgbe_i2c_start(struct ixgbe_hw *hw)
{
- u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
DEBUGFUNC("ixgbe_i2c_start");
+ i2cctl |= IXGBE_I2C_BB_EN_BY_MAC(hw);
+
/* Start condition must begin with data and clock high */
- (void) ixgbe_set_i2c_data(hw, &i2cctl, 1);
+ ixgbe_set_i2c_data(hw, &i2cctl, 1);
ixgbe_raise_i2c_clk(hw, &i2cctl);
/* Setup time for start condition (4.7us) */
usec_delay(IXGBE_I2C_T_SU_STA);
- (void) ixgbe_set_i2c_data(hw, &i2cctl, 0);
+ ixgbe_set_i2c_data(hw, &i2cctl, 0);
/* Hold time for start condition (4us) */
usec_delay(IXGBE_I2C_T_HD_STA);
ixgbe_lower_i2c_clk(hw, &i2cctl);
@@ -1570,28 +2307,40 @@
/**
* ixgbe_i2c_stop - Sets I2C stop condition
* @hw: pointer to hardware structure
*
* Sets I2C stop condition (Low -> High on SDA while SCL is High)
+ * Disables bit-bang mode and negates data output enable on X550
+ * hardware.
**/
static void ixgbe_i2c_stop(struct ixgbe_hw *hw)
{
- u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+ u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
+ u32 clk_oe_bit = IXGBE_I2C_CLK_OE_N_EN_BY_MAC(hw);
+ u32 bb_en_bit = IXGBE_I2C_BB_EN_BY_MAC(hw);
DEBUGFUNC("ixgbe_i2c_stop");
/* Stop condition must begin with data low and clock high */
- (void) ixgbe_set_i2c_data(hw, &i2cctl, 0);
+ ixgbe_set_i2c_data(hw, &i2cctl, 0);
ixgbe_raise_i2c_clk(hw, &i2cctl);
/* Setup time for stop condition (4us) */
usec_delay(IXGBE_I2C_T_SU_STO);
- (void) ixgbe_set_i2c_data(hw, &i2cctl, 1);
+ ixgbe_set_i2c_data(hw, &i2cctl, 1);
/* bus free time between stop and start (4.7us)*/
usec_delay(IXGBE_I2C_T_BUF);
+
+ if (bb_en_bit || data_oe_bit || clk_oe_bit) {
+ i2cctl &= ~bb_en_bit;
+ i2cctl |= data_oe_bit | clk_oe_bit;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+ }
}
/**
* ixgbe_clock_in_i2c_byte - Clocks in one byte via I2C
* @hw: pointer to hardware structure
@@ -1599,23 +2348,22 @@
*
* Clocks in one byte data via I2C data/clock
**/
static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data)
{
- s32 i, status = IXGBE_SUCCESS;
+ s32 i;
bool bit = 0;
DEBUGFUNC("ixgbe_clock_in_i2c_byte");
+ *data = 0;
for (i = 7; i >= 0; i--) {
- status = ixgbe_clock_in_i2c_bit(hw, &bit);
- if (status != IXGBE_SUCCESS)
- break;
+ ixgbe_clock_in_i2c_bit(hw, &bit);
*data |= bit << i;
}
- return status;
+ return IXGBE_SUCCESS;
}
/**
* ixgbe_clock_out_i2c_byte - Clocks out one byte via I2C
* @hw: pointer to hardware structure
@@ -1626,11 +2374,11 @@
static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data)
{
s32 status = IXGBE_SUCCESS;
s32 i;
u32 i2cctl;
- bool bit = 0;
+ bool bit;
DEBUGFUNC("ixgbe_clock_out_i2c_byte");
for (i = 7; i >= 0; i--) {
bit = (data >> i) & 0x1;
@@ -1639,13 +2387,14 @@
if (status != IXGBE_SUCCESS)
break;
}
/* Release SDA line (set high) */
- i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
- i2cctl |= IXGBE_I2C_DATA_OUT;
- IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, i2cctl);
+ i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+ i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw);
+ i2cctl |= IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl);
IXGBE_WRITE_FLUSH(hw);
return status;
}
@@ -1655,36 +2404,42 @@
*
* Clocks in/out one bit via I2C data/clock
**/
static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw)
{
+ u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
s32 status = IXGBE_SUCCESS;
u32 i = 0;
- u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
u32 timeout = 10;
bool ack = 1;
DEBUGFUNC("ixgbe_get_i2c_ack");
+ if (data_oe_bit) {
+ i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw);
+ i2cctl |= data_oe_bit;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+ }
ixgbe_raise_i2c_clk(hw, &i2cctl);
-
/* Minimum high period of clock is 4us */
usec_delay(IXGBE_I2C_T_HIGH);
/* Poll for ACK. Note that ACK in I2C spec is
* transition from 1 to 0 */
for (i = 0; i < timeout; i++) {
- i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
- ack = ixgbe_get_i2c_data(&i2cctl);
+ i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+ ack = ixgbe_get_i2c_data(hw, &i2cctl);
usec_delay(1);
- if (ack == 0)
+ if (!ack)
break;
}
- if (ack == 1) {
+ if (ack) {
DEBUGOUT("I2C ack was not received.\n");
status = IXGBE_ERR_I2C;
}
ixgbe_lower_i2c_clk(hw, &i2cctl);
@@ -1702,21 +2457,28 @@
*
* Clocks in one bit via I2C data/clock
**/
static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data)
{
- u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+ u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
DEBUGFUNC("ixgbe_clock_in_i2c_bit");
+ if (data_oe_bit) {
+ i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw);
+ i2cctl |= data_oe_bit;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+ }
ixgbe_raise_i2c_clk(hw, &i2cctl);
/* Minimum high period of clock is 4us */
usec_delay(IXGBE_I2C_T_HIGH);
- i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
- *data = ixgbe_get_i2c_data(&i2cctl);
+ i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+ *data = ixgbe_get_i2c_data(hw, &i2cctl);
ixgbe_lower_i2c_clk(hw, &i2cctl);
/* Minimum low period of clock is 4.7 us */
usec_delay(IXGBE_I2C_T_LOW);
@@ -1732,11 +2494,11 @@
* Clocks out one bit via I2C data/clock
**/
static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data)
{
s32 status;
- u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+ u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
DEBUGFUNC("ixgbe_clock_out_i2c_bit");
status = ixgbe_set_i2c_data(hw, &i2cctl, data);
if (status == IXGBE_SUCCESS) {
@@ -1751,40 +2513,49 @@
* This also takes care of the data hold time.
*/
usec_delay(IXGBE_I2C_T_LOW);
} else {
status = IXGBE_ERR_I2C;
- DEBUGOUT1("I2C data was not set to %X\n", data);
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "I2C data was not set to %X\n", data);
}
return status;
}
+
/**
* ixgbe_raise_i2c_clk - Raises the I2C SCL clock
* @hw: pointer to hardware structure
* @i2cctl: Current value of I2CCTL register
*
* Raises the I2C clock line '0'->'1'
+ * Negates the I2C clock output enable on X550 hardware.
**/
static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
{
+ u32 clk_oe_bit = IXGBE_I2C_CLK_OE_N_EN_BY_MAC(hw);
u32 i = 0;
u32 timeout = IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT;
u32 i2cctl_r = 0;
DEBUGFUNC("ixgbe_raise_i2c_clk");
+ if (clk_oe_bit) {
+ *i2cctl |= clk_oe_bit;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
+ }
+
for (i = 0; i < timeout; i++) {
- *i2cctl |= IXGBE_I2C_CLK_OUT;
+ *i2cctl |= IXGBE_I2C_CLK_OUT_BY_MAC(hw);
- IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl);
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
IXGBE_WRITE_FLUSH(hw);
/* SCL rise time (1000ns) */
usec_delay(IXGBE_I2C_T_RISE);
- i2cctl_r = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
- if (i2cctl_r & IXGBE_I2C_CLK_IN)
+ i2cctl_r = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+ if (i2cctl_r & IXGBE_I2C_CLK_IN_BY_MAC(hw))
break;
}
}
/**
@@ -1791,19 +2562,20 @@
* ixgbe_lower_i2c_clk - Lowers the I2C SCL clock
* @hw: pointer to hardware structure
* @i2cctl: Current value of I2CCTL register
*
* Lowers the I2C clock line '1'->'0'
+ * Asserts the I2C clock output enable on X550 hardware.
**/
static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl)
{
-
DEBUGFUNC("ixgbe_lower_i2c_clk");
- *i2cctl &= ~IXGBE_I2C_CLK_OUT;
+ *i2cctl &= ~(IXGBE_I2C_CLK_OUT_BY_MAC(hw));
+ *i2cctl &= ~IXGBE_I2C_CLK_OE_N_EN_BY_MAC(hw);
- IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl);
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
IXGBE_WRITE_FLUSH(hw);
/* SCL fall time (300ns) */
usec_delay(IXGBE_I2C_T_FALL);
}
@@ -1813,33 +2585,46 @@
* @hw: pointer to hardware structure
* @i2cctl: Current value of I2CCTL register
* @data: I2C data value (0 or 1) to set
*
* Sets the I2C data bit
+ * Asserts the I2C data output enable on X550 hardware.
**/
static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data)
{
+ u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
s32 status = IXGBE_SUCCESS;
DEBUGFUNC("ixgbe_set_i2c_data");
if (data)
- *i2cctl |= IXGBE_I2C_DATA_OUT;
+ *i2cctl |= IXGBE_I2C_DATA_OUT_BY_MAC(hw);
else
- *i2cctl &= ~IXGBE_I2C_DATA_OUT;
+ *i2cctl &= ~(IXGBE_I2C_DATA_OUT_BY_MAC(hw));
+ *i2cctl &= ~data_oe_bit;
- IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl);
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
IXGBE_WRITE_FLUSH(hw);
/* Data rise/fall (1000ns/300ns) and set-up time (250ns) */
usec_delay(IXGBE_I2C_T_RISE + IXGBE_I2C_T_FALL + IXGBE_I2C_T_SU_DATA);
+ if (!data) /* Can't verify data in this case */
+ return IXGBE_SUCCESS;
+ if (data_oe_bit) {
+ *i2cctl |= data_oe_bit;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+ }
+
/* Verify data was set correctly */
- *i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
- if (data != ixgbe_get_i2c_data(i2cctl)) {
+ *i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
+ if (data != ixgbe_get_i2c_data(hw, i2cctl)) {
status = IXGBE_ERR_I2C;
- DEBUGOUT1("Error - I2C data was not set to %X.\n", data);
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "Error - I2C data was not set to %X.\n",
+ data);
}
return status;
}
@@ -1847,18 +2632,27 @@
* ixgbe_get_i2c_data - Reads the I2C SDA data bit
* @hw: pointer to hardware structure
* @i2cctl: Current value of I2CCTL register
*
* Returns the I2C data bit value
+ * Negates the I2C data output enable on X550 hardware.
**/
-static bool ixgbe_get_i2c_data(u32 *i2cctl)
+static bool ixgbe_get_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl)
{
+ u32 data_oe_bit = IXGBE_I2C_DATA_OE_N_EN_BY_MAC(hw);
bool data;
DEBUGFUNC("ixgbe_get_i2c_data");
- if (*i2cctl & IXGBE_I2C_DATA_IN)
+ if (data_oe_bit) {
+ *i2cctl |= data_oe_bit;
+ IXGBE_WRITE_REG(hw, IXGBE_I2CCTL_BY_MAC(hw), *i2cctl);
+ IXGBE_WRITE_FLUSH(hw);
+ usec_delay(IXGBE_I2C_T_FALL);
+ }
+
+ if (*i2cctl & IXGBE_I2C_DATA_IN_BY_MAC(hw))
data = 1;
else
data = 0;
return data;
@@ -1871,18 +2665,19 @@
* Clears the I2C bus by sending nine clock pulses.
* Used when data line is stuck low.
**/
void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw)
{
- u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL);
+ u32 i2cctl;
u32 i;
DEBUGFUNC("ixgbe_i2c_bus_clear");
ixgbe_i2c_start(hw);
+ i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL_BY_MAC(hw));
- (void) ixgbe_set_i2c_data(hw, &i2cctl, 1);
+ ixgbe_set_i2c_data(hw, &i2cctl, 1);
for (i = 0; i < 9; i++) {
ixgbe_raise_i2c_clk(hw, &i2cctl);
/* Min high period of clock is 4us */
@@ -1922,8 +2717,42 @@
if (!(phy_data & IXGBE_TN_LASI_STATUS_TEMP_ALARM))
goto out;
status = IXGBE_ERR_OVERTEMP;
+ ERROR_REPORT1(IXGBE_ERROR_CAUTION, "Device over temperature");
out:
return status;
}
+
+/**
+ * ixgbe_set_copper_phy_power - Control power for copper phy
+ * @hw: pointer to hardware structure
+ * @on: TRUE for on, FALSE for off
+ */
+s32 ixgbe_set_copper_phy_power(struct ixgbe_hw *hw, bool on)
+{
+ u32 status;
+ u16 reg;
+
+ if (!on && ixgbe_mng_present(hw))
+ return 0;
+
+ status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ ®);
+ if (status)
+ return status;
+
+ if (on) {
+ reg &= ~IXGBE_MDIO_PHY_SET_LOW_POWER_MODE;
+ } else {
+ if (ixgbe_check_reset_blocked(hw))
+ return 0;
+ reg |= IXGBE_MDIO_PHY_SET_LOW_POWER_MODE;
+ }
+
+ status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL,
+ IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+ reg);
+ return status;
+}